Morton M340012 Bedienerhandbuch PDF herunterladen (Seite 13)

Morton

System Saver

Installation & Operation Manual 13

FIG. 17

UP button

Display

RECHARGE button

SELECT button

DOWN button

FIG. 16

When the power supply is plugged into the electrical

outlet, a model code and a test number (example:

J2.0), begin to flash in the faceplate display. Then,

“12:00 PM” and the words “PRESENT TIME" begin to

flash.

NOTE: If “- - - -” shows in the display, press the

DOWN button until the model code

(“o20” for Model M20, “o27” for Model M27,

“o30” for Model M30 or “o34” for Model M34)

shows in the display. Then, press the

SELECT button to set, and change to the

flashing “PRESENT TIME" display.

Step 1. Set Time of Day

If the words “PRESENT TIME" do not show in the dis-

play, press the SELECT button until they do.

1. Press the

UP or

DOWN buttons to set the

present time. Up moves the display ahead; down

sets the time back. Be sure AM or PM is correct.

NOTE: Press buttons and quickly release to slowly

advance the display. Hold the buttons down

for fast advance.

FIG. 18

Step 2. Set Water Hardness Number

1. Press the SELECT button once again to display a

flashing “25” and the word “HARDNESS”.

2. Press the

UP or

DOWN buttons to set your

water’s hardness number.

NOTE: If your water supply contains iron, compen-

sate for it by adding to the water hardness

number. For example, assume your water is

20 gpg hard and contains 2 ppm iron. Add 5

to the hardness number for each 1 ppm of

iron. In this example, you would use 30 for

your hardness number.

20 gpg hardness

2 ppm iron x 5 = 10 +10

(times) 30 HARDNESS NUMBER

Programming the Water Softener

(Models M20, M27 & M30)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Morton M340012 Bedienerhandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserspender Morton M340012